Broken Laptop Convert into a pc. Within 200 rupees_ (3 $ dollar)

The first step

You can see this is my broken laptop. 

  

At first I opened my laptop's WiFi card.

It's really straightforward. 

Just press the two sides and it will come in your hands.

Open the RAM  in the same way.

Opening the hard disk, the auction is just pulling backwards.

Open the touchpad and cable very carefully.

and the other one opened in the same way.

Slowly open all the scores behind this laptop.

and remove the back cover gently.

Then open the DVD Writer and just push it backwards.

Slowly open the screws. By blocking the motherboard.

And you can see how beautiful the motherboard is?

And open up the processor fan fans too.

Second step 

I bought 5mm 1by4 in ply boards from the general store.

And I made a design like a motherboard

And cut it with my Hexo blade

and cut 4 pieces of wood IN like my requirement.

The front will be what looks like?

So I made a design

And I marked what part would be excluded?

And I cut the front wood very nicely.

And I make a few holes through my drill

Again, I made a nice shape here.

Now I have to create a box which is inserted into the motherboard.

I would make it with wood. But you can make it anything

Now it looks like a nice box.

Now I will colour it black

 You can buy this black colour for only 20 rupees.

And I ended up painting

Now I will leave it for 24 hours to dry

After 24 hours  

Now I marked the size of the processor fan.

Now I made a hole in this place  through my AC Drill

So that the air can come from outside

and I take some ware as per my requirement.

I soldering up those very well.

After 24 hours I opened all the secure From the box

and Open the side wood.

  

I soldered the LED power connection and one of the switch

  

Connection from the motherboard.

And my broken laptop motherboard l set it the box Side wooden

I Attach fibreglass in front, of it so that, it looks beautiful

and I also attached  a small speaker for sound

And also I made 1 USB socket.

Which is attached to the front panel.

And all the connections ended well.

And I locked the side wood with some score. 

Now you can call it a CPU.

It looks pretty beautiful

The third step 

Now I will run this

Before running my CPU I connect my monitor VGA cable to it

and also connected the power cable and mouse 

bluetooth.

 now I'll press the power button

you can see the CPU will run.

I hope you like this.

If you have any questions write in the comment